HATs and other add-ons • Re: 230v input signal HAT
No offence to qualified electricians but most of them won't be good sources of advice on sensing mains with a RPi.Statistics: Posted by drgeoff — Wed Nov 20, 2024 9:03 am
View ArticleOther projects • Re: Speed limit alert proyect
Try to move the GPS receiver away from the pi, use a USB extension.I do only have a small usb adapter so I cannot do that, does it really matter for it to connect better?The Pi may interfere with the...
View ArticleDeutsch • Re: Raspi 5 Bootprobleme
Servus,habe auch Bootprobleme und gerade an Raspberri geschrieben, weil das Originalnetzteil offensichtlich nicht die richtige Spannung und Stromstärke liefert. Gleich nach dem Hochfahren kommt, die...
View ArticlePython • Re: Rpm,tachometer, refine
Did some refactoring of the code- not tested- there was already a constant "SENSOR_PIN", reused this throughout the code- made the variable names more consistent- the decision is now on the positive...
View ArticleClik here to view.
General discussion • Re: Locking threads of technical descussions/HW critisim...
Roy Cohn taught us all to never, ever, ever admit you are wrong.It has worked out beautifully for those who strictly follow his advice.Oh, OK. Looks like I was wrong then.... my bad. .... Statistics:...
View ArticleTroubleshooting • Re: First time user. Headless on a MacBook Air. Cannot connect
Are you using the latest (19 Nov 2024) image ? The prior version had a WiFi issue on first boot.Otherwise, try using the ip address of the pi (found in router or using fing).Statistics: Posted by...
View ArticleRaspberry Pi OS • Re: RPi 4 WiFi freeze
Which software are you using for streaming (rpicam-vid or other) and which web server (nginx or other)?Statistics: Posted by neilgl — Wed Nov 20, 2024 9:31 am
View ArticleMicroPython • Re: Thonny won't recognize Pico anymore
Can you get the pico into BOOTSEL mode and copy flash_nuke.uf2 to it?Statistics: Posted by neilgl — Wed Nov 20, 2024 9:36 am
View ArticleRaspberry Pi Connect • No connect buttons on "devices" screen
I did something rash the last time I used Connect (I do many rash things every day), and now on the Devices scree, the Device name appears on the lefthand side of the screen, but the two connect...
View ArticleRaspberry Pi Connect • Re: No connect buttons on "devices" screen
I did something rash the last time I used Connect (I do many rash things every day), and now on the Devices scree, the Device name appears on the lefthand side of the screen, but the two connect...
View ArticleOfficial Display • Re: Rpi5 + Touch Display 2 + OS Lite, how to rotate?
Thanks for your reply.So what I have to do is:1. Set video in cmdline.txt to:Code: video=DSI-2:720x1280@60,rotate=902. Set dtoverlay in config.txt to:Code:...
View ArticleTroubleshooting • Re: Docker eating up my ram and not freeing it, is it normal?
Wow, someone registered whole domain just to say "don't panic" and explain this nicely like I'm five. That's cool. What a nice place the world is for a minute.But where is...
View ArticleTroubleshooting • Re: BCM2711 change UART clock
Thank you for pointing to clk-bcm2835.c, it does look like the clock is configured here.However I am still not sure how to change it using an overlay.For the Pi5 it seems to be easier since clock...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • pps0/1: which gpio pin?
Hi,I've added two PPS sources to my raspberry pi zero 2w.In /boot/firmware/config.txt I configured:Code: dtoverlay=pps-gpio,gpiopin=18dtoverlay=pps-gpio,gpiopin=24The pulses come in fine:Code: $ cat...
View ArticleCompute Module • CM4: Is it possible to configure Camera 3 to use I2c1
Using a CM4, is it possible to configure a Camera 3 module to use I2C1. I have GPIO pins 2 and 3 mapped to I2C1, and I have the following...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Re: pps0/1: which gpio pin?
I guess I figured it out somewhat myself Code: $ cat /sys/class/pps/pps*/name pps@18.-1pps@12.-1Not ideal because I now need to parse some unspecified string.Statistics: Posted by flok99 — Thu Nov 21,...
View ArticleOther projects • 0.5.0 of "pigg" GUI for remote viewing and contol...
We're pleased to announce the 0.5.0 release of the "pigg" project for Remote control and viewing of Raspberry Pi GPIO hardware!0.5.0 brings many additions and improvements, the biggest one being...
View ArticleCompute Module • Re: CM4: Is it possible to configure Camera 3 to use I2c1
Have you read this guide? https://pip.raspberrypi.com/categories/ ... ameras.pdfStatistics: Posted by PhilE — Thu Nov 21, 2024 9:27 am
View ArticleAdvanced users • Re: Moving Linux Kernel to 6.12
I made a quick test on my Pi 5 yesterday night. It previously had kernel 6.6 with the NUMA test firmware. The upgrade went fine and I ran Geekbench 6. The composite results were within 0.3 % and the...
View ArticleClik here to view.
General discussion • Re: New Raspberry Pi Products
"Xmas present sales of RPi500 kit with 15.6" monitor hit new levels of mass sales....." Statistics: Posted by KeithMck — Thu Nov 21, 2024 9:30 am
View Article