There's no command that will show you directly, but you can check the logs to see if the devicetree overlay for the bcm2712 with d0 stepping was loaded
Pi 5 with stepping C chipPi 5 with stepping D chip
Pi 5 with stepping C chip
Code:
rpdom@raspi16:~ $ sudo vclog -m | grep d0rpdom@raspi16:~ $ Code:
rpdom@raspberrypi:~ $ sudo vclog -m | grep d0010209.793: Loaded overlay 'bcm2712d0'rpdom@raspberrypi:~ $ Statistics: Posted by rpdom — Fri Jun 06, 2025 11:06 pm