Troubleshooting • Re: Boot problem
1.8.5 has worked perfectly fine. Is that what you had?Statistics: Posted by libram11 — Sun Jun 23, 2024 3:54 am
View ArticleClik here to view.
General discussion • Re: New Raspberry Pi Products
CM5 Forward Guidance v1.4 dated 2024-06-20 has removed he 16GB RAM option Statistics: Posted by andrum99 — Sun Jun 23, 2024 4:07 am
View ArticleRaspberry Pi OS • Re: Turn off screen in Bookworm
https://forums.raspberrypi.com/viewtopi ... l#p2193326Statistics: Posted by aBUGSworstnightmare — Sun Jun 23, 2024 5:50 am
View ArticleTroubleshooting • Re: Five SDHC cards - four still cannot boot several Pis
Hello AllHaving read this forum a lot, and the sticky on unbootable scenarios, and a handful of other websites, I have run out of ideas. Here is a summary of my predicament and the things I have tried...
View ArticleCompute Module • Re: CM4 stuck during BOOT
Also i think the problem could be with the sd card connector itself because i desoldered it from one of my previous PCBs and thus it might be damaged in some way. Although when I looked at it, it...
View ArticleBeginners • Re: Simple file HTTP server
# busybox httpd -h /path/to/web_rootStatistics: Posted by BigRedMailbox — Sun Jun 23, 2024 6:45 am
View ArticleClik here to view.
Raspberry Pi OS • Re: Help with new setup - moving off SD onto raid1 nvme
Regardless of the bootable status of various rpi nvme implementations don't forget to take into account the fact if you "commission" a set of raid drives at the same time, they're gonna wear out at...
View ArticleOff topic discussion • Vale Larry W Finger
Sadly, the long time Linux Wireless developer Larry W Finger has passed away on the weekend. I just recently linked to Larry's github account to answer a question about a Wi-Fi driver for the...
View ArticleAdvanced users • Help moving from SD to nvme1 with ZFS root
HiI have recently installed bookworm on a pi5 sd which has 2 nvmesI want to move to booting from the nvme but I also want to move to zfs.so I am thinking I /boot to be copied over from sd to nvme now...
View ArticleTroubleshooting • modprobe: FATAL: Module nvme-fabrics not found in directory...
after dealing with some 'incompatible' NVME on M.2 HAT+ I've started further testing today (stability i.e.) and checked the logs related to name.What caught my attention is Code: Jun 24 08:00:29...
View ArticleAdvanced users • Re: Help moving from SD to nvme1 with ZFS root
isn't that the same question as in https://forums.raspberrypi.com/viewtopi ... 3#p2225042?Statistics: Posted by aBUGSworstnightmare — Mon Jun 24, 2024 6:20 am
View ArticleTroubleshooting • Re: Pi 4b constantly rebooting when usb wifi adapter connected
It sounds like you need a beefier power supply. What kind of power supply are you using?Note that it takes more juice to boot a Pi than it takes to keep it running. On some of my Pis, I get "lower...
View ArticleGeneral • Low current high sided switching with Pico
Hello.I have been trying to work out the simplest way to switch 3 channels at +12v using a Pico without resorting to bulky relay boards.I want to switch a couple of motorised ball valves which draw...
View ArticleAdvanced users • Re: Use rasp-config to change boot ROM option
That looks to have fixed it.Thanks you,MarkStatistics: Posted by nevyn — Mon Jun 24, 2024 6:26 am
View ArticleBeginners • Re: where has my posting gone on redshift not working
No such luck I have no intention of putting reshift back on my raspberry pi until I hear it has been fixed, i am so upset from both the faulty redshift program and the abuse I got from this...
View ArticleTroubleshooting • Re: Board burnout after modfying config.txt
This is definitely a Waveshare issue. Sounds like the board is shorting out.Statistics: Posted by jamesh — Mon Jun 24, 2024 6:41 am
View ArticleTroubleshooting • Re: Issues with serial communication between 2 Raspberry Pis
You've removed the default console=tty1 from cmdline.txt. Without that the kernel defaults to using the serial port. If you put it back in your shouldn't see any console activity on the...
View ArticleTroubleshooting • Re: rPi crashes, takes whole network down
Yes, the rPis (even the 5s) are a terrible choice for Jellyfin if it needs to do any transcoding but it doesn't. All devices it streams to, support the codecs used by the media so no transcoding is...
View ArticleOther • Re: New sd card
I recently got a new sd card for the pi and want to use that instead of the one that came with the kit. I also want to dual boot Raspberry OS with Kali Linux. I tried the use berry boot but it won’t...
View ArticleAdvanced users • Re: RPi 5 USB-C overvoltage protection
If I recall correctly, over voltage protection exists only for protecting power being applied to the usb-c power port, not the pins in the IO header.If you apply more voltage than you're supposed to...
View Article