100K bit rate didn't help.
Kernel version is 6.12.47 on both.
Changes to config.txt:
dtoverlay=gpio-poweroff,active_low=1,inactive_delay_ms=0,gpiopin=22
dtoverlay=mcp2515-can1,oscillator=16000000,interrupt=25
This is really weird issue, because I have used Rpi 5 with MCP2515 before, but never had this issue.
Probably some update is the issue here, but it's been about a year since was the last time I tested it.
Kernel version is 6.12.47 on both.
Changes to config.txt:
dtoverlay=gpio-poweroff,active_low=1,inactive_delay_ms=0,gpiopin=22
dtoverlay=mcp2515-can1,oscillator=16000000,interrupt=25
This is really weird issue, because I have used Rpi 5 with MCP2515 before, but never had this issue.
Probably some update is the issue here, but it's been about a year since was the last time I tested it.
Statistics: Posted by valtsu23 — Fri Oct 31, 2025 2:28 am