Ok, so I modified the command line, and now the RP5 display is working, but I have to unplug it from on HDMI after it has booted, and then swap it to the second. Once I plug in the second, the monitor comes on and I am able to use it, although at the wrong display resolution.
I’m using a Samsung U28R550UQN monitor, which is a IPS display with a 3840 x 2160 60hz resolution.
It just won’t send display data unless I boot the unit, and then unplug the HDMI cable and plug it into the second one. feel like I’m SO close!
I’m using a Samsung U28R550UQN monitor, which is a IPS display with a 3840 x 2160 60hz resolution.
It just won’t send display data unless I boot the unit, and then unplug the HDMI cable and plug it into the second one. feel like I’m SO close!
Statistics: Posted by jebrown215 — Sun Sep 07, 2025 7:38 pm