Have also now tried doing network boot. It downloaded, sat there for a sec checking partition, then same issue as before doesn't boot does nothing, unresponsive. Its ethernet cabled in, cannot ping it, cannot ssh into it to check anything.
Have also now tried a different monitor, different cable, same issue.
I did discover I was using 1.9.4 of the imager which has an issue with new lines in settings, so updated that, reimaged, and same issue. Checked the firstrun.sh and that had no issue with the new lines, and should be working. Am trying with another OS thats the latest to hopefully get that working through imager 1.9.5 since that supposedly fixed others issues.
Other than that, currently unsure where to go from here. Tried against the intended connected TV, a 1080p screen, and a 1440p screen, all failing. Tried to run on its own and blinking away.
Have also now tried a different monitor, different cable, same issue.
I did discover I was using 1.9.4 of the imager which has an issue with new lines in settings, so updated that, reimaged, and same issue. Checked the firstrun.sh and that had no issue with the new lines, and should be working. Am trying with another OS thats the latest to hopefully get that working through imager 1.9.5 since that supposedly fixed others issues.
Other than that, currently unsure where to go from here. Tried against the intended connected TV, a 1080p screen, and a 1440p screen, all failing. Tried to run on its own and blinking away.
Statistics: Posted by kokobrainz — Mon Jul 14, 2025 12:53 am