"ioctl(VIDIOC_STREAMON): No space left on device" would generally imply out of resources of some kind, most likely either memory or USB bandwidth.
Check the kernel log ("dmesg") for errors, and provide the output from "sudo lsusb -vv" so that we can see what those cameras are requesting in terms of USB resources.
I confirmed that both cameras were recognized when I checked the results using ("dmesg") and ("sudo lsusb -vv")
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.10.92-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1514 SMP PREEMPT Mon Jan 17 17:39:38 GMT 2022
[ 0.000000] random: fast init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] On node 0 totalpages: 999424
[ 0.000000] DMA zone: 3584 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 229376 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 12032 pages used for memmap
[ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 32 pages/cpu s91416 r8192 d31464 u131072
[ 0.000000] pcpu-alloc: s91416 r8192 d31464 u131072 alloc=32*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 983808
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:DE:EE:82 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c2ccd7bb-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000034000000-0x0000000038000000] (64MB)
[ 0.000000] Memory: 3501560K/3997696K available (11136K kernel code, 1950K rwdata, 3988K rodata, 3712K init, 1253K bss, 168456K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 36801 entries in 144 pages
[ 0.000000] ftrace: allocated 144 pages with 2 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x3b0/0x570 with crng_init=1
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000259] Console: colour dummy device 80x25
[ 0.000314] printk: console [tty1] enabled
[ 0.000362] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000389] pid_max: default: 32768 minimum: 301
[ 0.000533] LSM: Security Framework initializing
[ 0.000782] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000854] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002218] cgroup: Disabling memory control group subsystem
[ 0.004710] rcu: Hierarchical SRCU implementation.
[ 0.005821] EFI services will not be available.
[ 0.006365] smp: Bringing up secondary CPUs ...
[ 0.007385] Detected PIPT I-cache on CPU1
[ 0.007477] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.008696] Detected PIPT I-cache on CPU2
[ 0.008747] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.009855] Detected PIPT I-cache on CPU3
[ 0.009905] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.010058] smp: Brought up 1 node, 4 CPUs
[ 0.010075] SMP: Total of 4 processors activated.
[ 0.010090] CPU features: detected: 32-bit EL0 Support
[ 0.010104] CPU features: detected: CRC32 instructions
[ 0.010118] CPU features: detected: 32-bit EL1 Support
[ 0.044593] CPU: All CPU(s) started at EL2
[ 0.044662] alternatives: patching kernel code
[ 0.046419] devtmpfs: initialized
[ 0.058154] Enabled cp15_barrier support
[ 0.058195] Enabled setend support
[ 0.058410] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.058441] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.067833] pinctrl core: initialized pinctrl subsystem
[ 0.068748] DMI not present or invalid.
[ 0.069135] NET: Registered protocol family 16
[ 0.072397] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.072667] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.073581] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.073702] audit: initializing netlink subsys (disabled)
[ 0.074120] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[ 0.074648] thermal_sys: Registered thermal governor 'step_wise'
[ 0.075122] cpuidle: using governor menu
[ 0.075533] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.075708] ASID allocator initialised with 65536 entries
[ 0.075848] Serial: AMBA PL011 UART driver
[ 0.106494] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.112432] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-01-20T13:57:40, variant start_x
[ 0.116438] raspberrypi-firmware soc:firmware: Firmware hash is bd88f66f8952d34e4e0613a85c7a6d3da49e13e2
[ 0.151516] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.156128] vgaarb: loaded
[ 0.156688] SCSI subsystem initialized
[ 0.156918] usbcore: registered new interface driver usbfs
[ 0.156983] usbcore: registered new interface driver hub
[ 0.157053] usbcore: registered new device driver usb
[ 0.157383] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.159323] clocksource: Switched to clocksource arch_sys_counter
[ 1.194573] VFS: Disk quotas dquot_6.6.0
[ 1.194685] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.194860] FS-Cache: Loaded
[ 1.195124] CacheFiles: Loaded
[ 1.196473] simple-framebuffer 3e402000.framebuffer: framebuffer at 0x3e402000, 0x7f8000 bytes, mapped to 0x(____ptrval____)
[ 1.196491] simple-framebuffer 3e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[ 1.196995] Console: switching to colour frame buffer device 240x67
[ 1.208569] simple-framebuffer 3e402000.framebuffer: fb0: simplefb registered!
[ 1.219097] NET: Registered protocol family 2
[ 1.219763] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.223373] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 1.223433] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.223711] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 1.224307] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.224581] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 1.224664] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 1.224986] NET: Registered protocol family 1
[ 1.225971] RPC: Registered named UNIX socket transport module.
[ 1.225985] RPC: Registered udp transport module.
[ 1.225995] RPC: Registered tcp transport module.
[ 1.226006] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.226030] PCI: CLS 0 bytes, default 64
[ 1.228571] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.228902] kvm [1]: IPA Size Limit: 44 bits
[ 1.230110] kvm [1]: vgic interrupt IRQ9
[ 1.230407] kvm [1]: Hyp mode initialized successfully
[ 1.232745] Initialise system trusted keyrings
[ 1.233105] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.239616] zbud: loaded
[ 1.241440] FS-Cache: Netfs 'nfs' registered for caching
[ 1.242158] NFS: Registering the id_resolver key type
[ 1.242204] Key type id_resolver registered
[ 1.242216] Key type id_legacy registered
[ 1.242334] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.242347] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.243563] Key type asymmetric registered
[ 1.243579] Asymmetric key parser 'x509' registered
[ 1.243630] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.243894] io scheduler mq-deadline registered
[ 1.243907] io scheduler kyber registered
[ 1.248239] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.248268] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.248338] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.248414] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 1.313420] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.313818] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.313836] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.313852] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.313943] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.314181] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.317982] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.318342] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.318463] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.318882] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.334685] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.334730] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.334752] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.334788] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.334809] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.343343] iproc-rng200 fe104000.rng: hwrng registered
[ 1.343758] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.345091] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.345503] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.357407] brd: module loaded
[ 1.370542] loop: module loaded
[ 1.372575] Loading iSCSI transport class v2.0-870.
[ 1.375848] libphy: Fixed MDIO Bus: probed
[ 1.377450] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.387337] libphy: bcmgenet MII bus: probed
[ 1.435448] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.436630] usbcore: registered new interface driver r8152
[ 1.436708] usbcore: registered new interface driver lan78xx
[ 1.436763] usbcore: registered new interface driver smsc95xx
[ 1.485838] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.486034] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.486068] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.486831] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000e0000000890
[ 1.488209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.488225] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.488237] usb usb1: Product: xHCI Host Controller
[ 1.488251] usb usb1: Manufacturer: Linux 5.10.92-v8+ xhci-hcd
[ 1.488262] usb usb1: SerialNumber: 0000:01:00.0
[ 1.489027] hub 1-0:1.0: USB hub found
[ 1.489122] hub 1-0:1.0: 1 port detected
[ 1.489765] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.489786] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.489807] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.490198] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.490213] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.490225] usb usb2: Product: xHCI Host Controller
[ 1.490237] usb usb2: Manufacturer: Linux 5.10.92-v8+ xhci-hcd
[ 1.490249] usb usb2: SerialNumber: 0000:01:00.0
[ 1.490881] hub 2-0:1.0: USB hub found
[ 1.490948] hub 2-0:1.0: 4 ports detected
[ 1.492558] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.492835] dwc_otg: FIQ enabled
[ 1.492847] dwc_otg: NAK holdoff enabled
[ 1.492857] dwc_otg: FIQ split-transaction FSM enabled
[ 1.492871] Module dwc_common_port init
[ 1.493465] usbcore: registered new interface driver uas
[ 1.493563] usbcore: registered new interface driver usb-storage
[ 1.493806] mousedev: PS/2 mouse device common for all mice
[ 1.495824] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.499569] sdhci: Secure Digital Host Controller Interface driver
[ 1.499583] sdhci: Copyright(c) Pierre Ossman
[ 1.500248] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 1.500790] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.503933] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.504279] hid: raw HID events driver (C) Jiri Kosina
[ 1.504499] usbcore: registered new interface driver usbhid
[ 1.504510] usbhid: USB HID core driver
[ 1.504842] ashmem: initialized
[ 1.513388] Initializing XFRM netlink socket
[ 1.513436] NET: Registered protocol family 17
[ 1.513583] Key type dns_resolver registered
[ 1.514626] registered taskstats version 1
[ 1.514656] Loading compiled-in X.509 certificates
[ 1.515164] Key type ._fscrypt registered
[ 1.515176] Key type .fscrypt registered
[ 1.515187] Key type fscrypt-provisioning registered
[ 1.526968] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.527264] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.527438] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
[ 1.535959] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.536946] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.536961] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.565719] of_cfs_init
[ 1.565866] of_cfs_init: OK
[ 1.584227] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.585897] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.587569] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.590558] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.592220] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.601515] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.602441] Waiting for root device PARTUUID=c2ccd7bb-02...
[ 1.658772] mmc1: new high speed SDIO card at address 0001
[ 1.704340] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 1.705388] mmcblk0: mmc0:aaaa SD32G 29.7 GiB
[ 1.708056] mmcblk0: p1 p2
[ 1.719164] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 1.719182] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 1.743368] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.893998] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.894019] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.894032] usb 1-1: Product: USB2.0 Hub
[ 1.896178] hub 1-1:1.0: USB hub found
[ 1.896459] hub 1-1:1.0: 4 ports detected
[ 2.191365] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
[ 2.292509] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ 2.295903] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[ 2.295916] EXT4-fs (mmcblk0p2): recovery complete
[ 2.303780] usb 1-1.2: New USB device found, idVendor=1e4e, idProduct=0100, bcdDevice= 2.00
[ 2.303796] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.303809] usb 1-1.2: Product: PureThermal (fw:v1.3.0)
[ 2.303821] usb 1-1.2: Manufacturer: GroupGets
[ 2.303833] usb 1-1.2: SerialNumber: 00160041-5009-564e-3536-2*****000000
[ 2.304725] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.304828] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 2.305647] devtmpfs: mounted
[ 2.315840] Freeing unused kernel memory: 3712K
[ 2.316047] Run /sbin/init as init process
[ 2.316057] with arguments:
[ 2.316067] /sbin/init
[ 2.316076] splash
[ 2.316086] with environment:
[ 2.316096] HOME=/
[ 2.316105] TERM=linux
[ 2.387382] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
[ 2.499698] usb 1-1.3: New USB device found, idVendor=1e4e, idProduct=0100, bcdDevice= 2.00
[ 2.499721] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.499735] usb 1-1.3: Product: PureThermal (fw:v1.3.0)
[ 2.499747] usb 1-1.3: Manufacturer: GroupGets
[ 2.499760] usb 1-1.3: SerialNumber: 00480024-500a-564e-3536-2*****000000
[ 2.678945] systemd[1]: System time before build time, advancing clock.
[ 2.775646] NET: Registered protocol family 10
[ 2.777479] Segment Routing with IPv6
[ 2.829785] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.830756] systemd[1]: Detected architecture arm64.
[ 2.837016] systemd[1]: Set hostname to <raspberrypi>.
[ 3.486681] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 3.632526] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.634148] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.636475] systemd[1]: Created slice system-getty.slice.
[ 3.636905] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.637883] systemd[1]: Created slice system-modprobe.slice.
[ 3.638000] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.638878] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.639815] systemd[1]: Created slice User and Session Slice.
[ 3.640372] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.641524] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.641988] systemd[1]: Reached target Slices.
[ 3.642176] systemd[1]: Reached target Swap.
[ 3.643203] systemd[1]: Listening on Syslog Socket.
[ 3.644029] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.644453] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.645654] systemd[1]: Listening on Journal Audit Socket.
[ 3.646421] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.647420] systemd[1]: Listening on Journal Socket.
[ 3.649353] systemd[1]: Listening on udev Control Socket.
[ 3.650149] systemd[1]: Listening on udev Kernel Socket.
[ 3.651086] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 3.655166] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.659908] systemd[1]: Mounting RPC Pipe File System...
[ 3.665512] systemd[1]: Mounting Kernel Debug File System...
[ 3.670881] systemd[1]: Mounting Kernel Trace File System...
[ 3.671388] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 3.677554] systemd[1]: Starting Restore / save the current clock...
[ 3.683713] systemd[1]: Starting Set the console keyboard layout...
[ 3.689135] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.695035] systemd[1]: Starting Load Kernel Module configfs...
[ 3.704530] systemd[1]: Starting Load Kernel Module drm...
[ 3.715993] systemd[1]: Starting Load Kernel Module fuse...
[ 3.719823] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.724996] systemd[1]: Starting File System Check on Root Device...
[ 3.735087] systemd[1]: Starting Journal Service...
[ 3.749182] fuse: init (API version 7.32)
[ 3.750867] systemd[1]: Starting Load Kernel Modules...
[ 3.760348] systemd[1]: Starting Coldplug All udev Devices...
[ 3.774144] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.778368] systemd[1]: Mounted RPC Pipe File System.
[ 3.791189] systemd[1]: Mounted Kernel Debug File System.
[ 3.792569] systemd[1]: Mounted Kernel Trace File System.
[ 3.794820] systemd[1]: Finished Restore / save the current clock.
[ 3.798516] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.805885] systemd[1]: modprobe@configfs.service: Succeeded.
[ 3.808220] systemd[1]: Finished Load Kernel Module configfs.
[ 3.811281] systemd[1]: modprobe@drm.service: Succeeded.
[ 3.812766] systemd[1]: Finished Load Kernel Module drm.
[ 3.815560] systemd[1]: modprobe@fuse.service: Succeeded.
[ 3.817059] systemd[1]: Finished Load Kernel Module fuse.
[ 3.825147] systemd[1]: Mounting FUSE Control File System...
[ 3.827186] cryptd: max_cpu_qlen set to 1000
[ 3.831065] systemd[1]: Mounting Kernel Configuration File System...
[ 3.842395] systemd[1]: Started File System Check Daemon to report status.
[ 3.854872] systemd[1]: Mounted FUSE Control File System.
[ 3.856121] systemd[1]: Mounted Kernel Configuration File System.
[ 3.910289] i2c /dev entries driver
[ 3.917907] systemd[1]: Finished Load Kernel Modules.
[ 3.923247] systemd[1]: Starting Apply Kernel Variables...
[ 3.995157] systemd[1]: Finished Apply Kernel Variables.
[ 4.002879] systemd[1]: Finished File System Check on Root Device.
[ 4.009084] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.145547] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.154462] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 4.158004] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 4.158260] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 4.163003] systemd[1]: Starting Load/Save Random Seed...
[ 4.169736] systemd[1]: Starting Create System Users...
[ 4.171252] systemd[1]: Started Journal Service.
[ 4.242248] systemd-journald[138]: Received client request to flush runtime journal.
[ 4.274056] systemd-journald[138]: File /var/log/journal/822fa3615d1e449ebdddd2576d73accd/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.178477] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[ 5.180854] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[ 5.184766] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[ 5.185902] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[ 5.264086] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.266156] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 5.266190] [vc_sm_connected_init]: start
[ 5.294643] [vc_sm_connected_init]: installed successfully
[ 5.296216] mc: Linux media interface: v0.10
[ 5.394565] videodev: Linux video capture interface: v2.00
[ 5.431414] checking generic (3e402000 7f8000) vs hw (0 ffffffffffffffff)
[ 5.431443] fb0: switching to vc4drmfb from simple
[ 5.432465] Console: switching to colour dummy device 80x25
[ 5.438571] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[ 5.442076] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[ 5.450105] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.455597] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.461499] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 5.461961] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 5.462343] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 5.462642] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 5.462666] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.462692] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.462707] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.462721] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.466660] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 5.467146] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 5.471984] Console: switching to colour frame buffer device 240x67
[ 5.473100] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 5.473596] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 5.473623] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.473649] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.473665] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.473679] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.475805] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 5.481790] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.498434] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[ 5.518377] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.525652] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 5.530448] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.632106] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 5.768286] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.822068] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.884369] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 5.890446] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[ 5.910229] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 5.921806] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.923224] usbcore: registered new interface driver brcmfmac
[ 6.116584] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 6.116642] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 6.133257] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 6.133326] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 6.151926] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 6.151979] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 6.159409] random: crng init done
[ 6.159429] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.168813] uvcvideo: Found UVC 1.00 device PureThermal (fw:v1.3.0) (1e4e:0100)
[ 6.169278] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 6.169337] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 6.210773] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.221848] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 6.285993] input: PureThermal (fw:v1.3.0): PureTh as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
[ 6.292412] uvcvideo: Found UVC 1.00 device PureThermal (fw:v1.3.0) (1e4e:0100)
[ 6.326152] input: PureThermal (fw:v1.3.0): PureTh as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input1
[ 6.330124] usbcore: registered new interface driver uvcvideo
[ 6.330147] USB Video Class driver (1.1.1)
[ 7.299774] uart-pl011 fe201000.serial: no DMA platform data
[ 7.453858] 8021q: 802.1Q VLAN Support v1.8
[ 7.583550] Adding 102396k swap on /var/swap. Priority:-2 extents:2 across:110588k SSFS
[ 8.103674] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 8.424698] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 8.426862] bcmgenet fd580000.ethernet eth0: Link is Down
[ 13.954478] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.613533] Bluetooth: Core ver 2.22
[ 15.613614] NET: Registered protocol family 31
[ 15.613619] Bluetooth: HCI device and connection manager initialized
[ 15.613634] Bluetooth: HCI socket layer initialized
[ 15.613642] Bluetooth: L2CAP socket layer initialized
[ 15.613656] Bluetooth: SCO socket layer initialized
[ 15.626400] Bluetooth: HCI UART driver ver 2.3
[ 15.626440] Bluetooth: HCI UART protocol H4 registered
[ 15.626530] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 15.626738] Bluetooth: HCI UART protocol Broadcom registered
[ 15.818656] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.818667] Bluetooth: BNEP filters: protocol multicast
[ 15.818680] Bluetooth: BNEP socket layer initialized
[ 15.839925] NET: Registered protocol family 38
[ 15.905949] Bluetooth: RFCOMM TTY layer initialized
[ 15.905982] Bluetooth: RFCOMM socket layer initialized
[ 15.906010] Bluetooth: RFCOMM ver 1.11
[ 31.711397] cam-dummy-reg: disabling
[ 31.711435] cam1-reg: disabling
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Bus 001 Device 003: ID 1e4e:0100 Cubeternet WebCam
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1e4e Cubeternet
idProduct 0x0100 WebCam
bcdDevice 2.00
iManufacturer 1 GroupGets
iProduct 2 PureThermal (fw:v1.3.0)
iSerial 3 00160041-5009-564e-3536-2*****000000
:
:
:
:
Bus 001 Device 004: ID 1e4e:0100 Cubeternet WebCam
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1e4e Cubeternet
idProduct 0x0100 WebCam
bcdDevice 2.00
iManufacturer 1 GroupGets
iProduct 2 PureThermal (fw:v1.3.0)
iSerial 3 00480024-500a-564e-3536-2*****000000
Statistics: Posted by sunghyun96 — Fri Jul 11, 2025 2:56 am