Hi, thanks for the answer. I figured it out. I used the "set preview controls" exposure time parameters and than started the cam. But it only works when using the set controls method after the camera has been started. Now I can set the gain and exposure time. But it turns out, that the camera is just to slow to properly capture 30fps at 640x640. With a low exposure time the image gets way to dark for the AI model. And a higher gain will obviously make the image very noisy. Guess I just have to buy a AI Kit, and use one of the pi cams v3(they are WAY less blurry and laggy, even under low light conditions
Statistics: Posted by Fazeli24 — Wed May 14, 2025 8:14 pm