i was looking for the EDID ("display") line in your diag screen.
your bootloader is very old (2011?)
- suggest upgrading the bootloader
https://www.raspberrypi.com/documentati ... ate_stable
you can set the resolution manually
in /boot/cmdline.txt (add to the front/end of the line, NOT a new line)
-- IMPORTANT NOTE: for Bookworm, the file is at /boot/firmware/cmdline.txt !!
video=HDMI-A-1:1024x768@60D
(or whatever resolution you want)
your bootloader is very old (2011?)
- suggest upgrading the bootloader
https://www.raspberrypi.com/documentati ... ate_stable
you can set the resolution manually
in /boot/cmdline.txt (add to the front/end of the line, NOT a new line)
-- IMPORTANT NOTE: for Bookworm, the file is at /boot/firmware/cmdline.txt !!
video=HDMI-A-1:1024x768@60D
(or whatever resolution you want)
Statistics: Posted by terribleted — Sat May 03, 2025 5:19 pm