Appears 11/19 OS implemented "Command Queuing" by default. My Gigastone MLC 32GB does not support it. I am not sure if that is it. CQ is poorly documented outside of the PI 5 world. You can disable CQE by editing /boot/firmware/config.txt and adding the line:
Code: Select all
dtparam=sd_cqe=off
Did not solve my problem, but clearly there are issues with 11/19 release.
Code: Select all
dtparam=sd_cqe=off
Did not solve my problem, but clearly there are issues with 11/19 release.
Statistics: Posted by nevadabrown — Fri Dec 27, 2024 5:13 pm