Lovely pics. Image may be NSFW.
Clik here to view.
Heat dissipation is good. Probably won't even need an extra heat sink. The QFN-60's junction to ambient thermal resistance is listed at 40.542 C/W iin the datasheet, I assume on a Pico 2-like board. If using 85C, with a delta of 60C you'd need about 1.5W to hit that upper limit -- probably can only be done with the GPIO pads heating the die. Processor core(s) at 600 MHz are too small to blow the chip up... Image may be NSFW.
Clik here to view.
Clik here to view.
Heat dissipation is good. Probably won't even need an extra heat sink. The QFN-60's junction to ambient thermal resistance is listed at 40.542 C/W iin the datasheet, I assume on a Pico 2-like board. If using 85C, with a delta of 60C you'd need about 1.5W to hit that upper limit -- probably can only be done with the GPIO pads heating the die. Processor core(s) at 600 MHz are too small to blow the chip up... Image may be NSFW.Clik here to view.
Statistics: Posted by katak255 — Fri Oct 18, 2024 1:05 am
